Power sources Optimized for your application

Loading
Loading Loading

ACU: High-performing control unit for our LED calibration standards

The ACU is a new compact control unit for ACS calibration standards from Instrument Systems. It contains a high-precision constant current source in a compact desktop housing in addition to a TEC controller for accurate temperature stabilization. The ACU has been developed for both laboratory and production use. The ACU is controlled by means of a computer via USB using the ACSControl software. Both, Windows 10 and OS X operating systems are supported.

Brochure "ACS & ACU Series"

DC power supply SNT 10: Optimized for automotive applications

The system power supply SNT 10 was especially developed for the automotive and traffic technology industries. Its unique features are ideal in terms of accuracy and stability for photometric measurements with goniophotometers or integrating spheres. The SNT 10 offers an outstanding programming resolution and measurement precision conforming to the GTB Photometry Accuracy Guidelines and SAE Standards J1330 for type testing of automotive lighting.

Brochure SNT 10

Features:

  • Controlled DC power supply for lab applications, available in versions with a maximum voltage of 50 V or 32 V
  • High programming resolution of 1 mV and 1 mA or 0.2 mA and 0.1 mA
  • Large display showing operating mode, current and voltage values and multiplexer channel
  • High-precision measurement and stabilization of the settings via sensor wires leading to the sample
  • 19” rack with CAN-bus coupling and serial RS232 interface

PS 102 and PS 120: Laboratory power supply for auxiliary light sources

With the PS series Instrument Systems offers high-end lab power supplies that have been optimized for auxiliary light sources in different measurement setups. Model PS-102 is ideally suitable for the operation of auxiliary light sources in integrating spheres or halogen lamps for T/R measurement (0-42 V, 0-6 A).

The PS 120 is a highly stable, compact switching power supply with a digital display (0-30 V, 0-10 A).

Vektrex: Power supply for LED and laser stress tests

When LED modules or lasers are subjected in series to burn-in or endurance tests, a good power supply can reduce the risk of damage due to abnormal voltage or current stress. The impulse power sources of the Vektrex Spike series are specially designed for conducting multi-component stress tests. At the same time they can significantly reduce power consumption, and due to the special digital power conversion they do not require water cooling.

Keithley: Diversity for the laboratory

In addition to the voltage or power source, the source meters from Keithley also offer numerous measurement functions. They can be configured as a precision power supply, power source, voltage source, picoammeter, electronic load, etc. and measure, e.g. set of drain curves, threshold voltages, gate leakage currents and transconductance. In addition to proven precision and accuracy – depending on the model – graphic touchscreen displays offer intuitive use.

HEIDEN: Frequency and voltage converters for LED/SSL

The linear AC/DC sources of the HEIDEN ACS series serve to simulate frequencies, voltage, curve shapes, phase angles and currents. This is necessary, e.g. when devices must be conceived for other network forms, e.g. the US market with a 110 V / 60 Hz network or 400 Hz on-board networks in aircraft. Depending on the model version, the ACS are freely adjustable single- or three-phase sinus, rectangular or triangular voltages. The frequency range can be adjusted manually, and frequencies that are often used can be selected at the touch of a button. With their linear switching concept, our AC sources offer many advantages, e.g. minimum distortion of the output signal, broad output bandwidth, high crest factors and compact design, e.g. 1,000 VA in 6 HE, 60 kg.